Corvair Cylinder Head Projects

Cutaway cylinder head

.

.

.

Slant exhaust tube conversion with modified Clark's Ultimate headers

A cylinder head on the slant tube machining fixture

A port machined for the slant tube conversion. Pre-shaping of the port was done with a ball end mill. This is then blended by hand with a die grinder.

.

.

.

Small valve heads machined for 140 exhaust stacks

A machined port ready for hand blending

.

.

.

Head gasket surfaces machined flat

.

.

.

Removing intake manifolds for Weber carburetor manifold conversion

Still a lot of hand work required at this point

Corvair Connection manifolds

.

.

.

6 Carburetors!

Machining a head on the 36 degree fixture

A cylinder head with the manifold removed

The manifold mocked-up with carburetors and linkage

End view

Parts

The billet manifold concept

Before and after comparison

Replacement Jets & Metering Rods | Custom Metering Rods | Metering Rod FAQ | Metering Rod Hints
Corvair Turbo Fuel Injection | Corvair non-turbo Fuel Injection | Corvair Fuel Injection FAQ | Port Injection
Home | Exhaust Components | Cylinder Heads | Policies | Order Form | About BHE

e-mail Address: sales at blackhawkengr.com

Last Up Date: April 3, 2008 10:18 AM

©2000-2008 Black Hawk Engineering